How To Set Ip Address On Windows 7

Sometimes in club to gain connectivity in certain networks where a DHCP server is not running, the configuration of a static IP accost is required.

The steps required to setup up a static IP address are rather straightforward, just the process is a bit unlike from Windows Vista and XP.

Let'south become through the steps now and configure a static IPv4 address in Windows 7.

Static IPv4 Configuration in Windows 7

The first thing that must be done is to proceeds admission to the Network and Sharing Center in Windows 7. This can be washed in one of two ways; the showtime way to access information technology is via the command panel.

Select the Windows 7 Orb on the bottom left-hand corner and select the control panel option every bit shown below:

At that place are several views which are available for the control panel; by default the category view is used. When using the category view the option that you need to select is called View network status and Tasks, as highlighted below.

This will bring yous to the Network and Sharing Eye.

The 2d way to proceeds access to the Network and Sharing Center is to apply the network icon which is displayed in the system tray when a network interface has been enabled.

When this icon is correct-clicked the choice to open the Network and Sharing Heart is given every bit shown below:

Once the Network and Sharing Heart is open at that place is an option which allows the change of adapter settings which is shown in the upper left manus corner of the window. This is shown highlighted in the post-obit effigy (click on the image to enlarge):

Once in the Network Connections window, an interface must be selected which is going to be configured with the static IP address. In the following example, both a wired and wireless interface are shown equally examples.

For the purposes of this article the wired interface will be used as the interface being given a static IP Address.

Past right-clicking on the right interface a sub-card is shown; from this menu select the properties option.

In one case the backdrop choice is selected the interface backdrop windows will be displayed. This screen gives the option to configure a number of dissimilar network parameters.

Since we want to change the interface IPv4 IP address this choice must be selected from the window. Once this pick is selected the properties button will be enabled; printing the properties push button.

Once the backdrop button is pressed the IPv4 properties window is displayed which shows that the interface is currently configured to obtain both its IP accost and its DNS server data automatically.

In social club to change to a static IP address the option to Utilize the following IP address must be selected; in one case this is washed the choice to enter the IP address parameters is enabled and the Apply the post-obit DNS server addresses option is selected.

For the purpose of this article the IP address 192.168.1.100 is used with a subnet mask of 255.255.255.0 and a default gateway of 192.168.i.1. The DNS server which will exist configured is 4.two.2.2.

These options are shown in their correct locations in the following figure:

Once these options take been entered on the screen merely press Ok on both belongings screens and the configuration of a static IP is complete.

The knowledge of static IP configuration is vital in modern organizational environments as many do not completely utilize automated IP assignment; it is also vital knowledge when trying to troubleshoot IPv4.

If yous're still running a Vista system, here'due south where you tin learn how to configure an IP address in Windows Vista.

Fix to examination your skills in Windows 7? See how they stack up with this assessment from Smarterer. Start this Windows vii test now

Source: https://www.pluralsight.com/blog/it-ops/windows-7-ip-addressing

Posted by: gonzalezaustens.blogspot.com

Share this post